top of page

12/24VDC USB CHARGERS

POWERVERTER Pro

FOR MOBILES AND TABLETS – THE SAFE ALTERNATIVE FOR ON BOARD POWER

The widespread use of smartphones and computer tablets has created an increasing need for user accessible, on the move charging systems. The PowerVerter USB Chargers can be easily installed onto any vehicle and allow both drivers and

passengers to readily access power to charge any device connected via a USB lead. This type of system has the distinct advantage of largely negating the need for mains electricity on vehicles. The 5Volt DC power is much safer than mains, so installation is quick and simple. Passengers can access the charging facility directly and power their equipment simply through the USB charging lead which is supplied with all such products. All versions in the range can be connected directly to both 12Vdc and 24Vdc systems without adjustment. The advanced electronic design will also automatically detect if the device is an Apple or Android configuration and alter the charging

process accordingly. This ensures that whatever device is connected, be it Apple, Android, iPad, phone or tablet, it will always be charged as fully as time and capacity allow. 

THE RANGE 

The PowerVerter USB range has been completely re-designed for 2016 to include a standard design that can be used in regular as well as slim-line

installations. Aesthetically the design has been improved with a dark grey body and contrasting light grey ring as well as an attractive and more obvious LED indicator. This helps to draw attention to the unit and encourages use. Part numbers are: PVPro-S for a single output and PVPro-D for a

double output. The front fitting system has also been improved with a round bezel with tamperproof covering ring to hide the screws, yet still allow the unit to be replaced quickly and easily should this be required. Part numbers are: PVPro-SFf (single output) and PVPro-DFf (double output).

Electronically, the design now includes automatic short circuit detection, so in the event of tampering or compromise, the unit will automatically shut down, then re-start again once the fault has been removed. A charger only version is also available 

for permanent, behind-the-scenes installations without customer interface. Part number is: PV-USB2. The range is completed with our ‘Pod’. This is ideal for retrofit installations and is designed to fit underneath the seat in front. This system can also be bought as a complete assembly including; PVPro USB charger, pod and 1.2m of fused cable. Please order part numbers; PVPro-S-Assy (single) and PVPro-D-Assy (double).

PVPro-S USB charger
PVPro-DFF USB charger
COMMERCIAL INSTALLATIONS

Like all products, the USB chargers are

manufactured using rugged components to provide years of service in demanding commercial environments. Due to the limitations of public use, the guarantee on these products is limited to three years.

The PowerVerter USB chargers offer an advanced design that effectively counteracts the voltage drop common when output currents vary as different devices charge at different rates. This avoids the common problem of the phone or tablet indicating it is charging when in fact very little 

current is being supplied. They also have an exceptionally low quiescent current of less that 2mA meaning that multiple devices can safely be installed throughout buses and coaches without

materially discharging the battery.

They have been designed to meet the rigorous standards required for on board commercial vehicle applications including BS EN50498 and ISO 7637-2 and are both CE and E marked. The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer controlled SMT for maximum reliability. All versions have a subtle blue LED light to highlight their location on the vehicle.

A charger-only version is also available for permanent, behind-the-scenes installations without a customer interface, available with a USB-A or USB-C connector. Part numbers are PV-USB2-A and PV-USB2-C respectively.

PV-USB2-C.png
SAFETY
PV-USB2
WARRANTY

Like all products, the USB chargers are

manufactured using rugged components to provide years of service in demanding commercial environments. Due to the limitations of public use, the guarantee on these products is limited to three years.

A requirement of the USB standard is that the metal cage around the USB plugs and sockets is connected to ground (zero volts). If a USB charger is to be used in an application with a positive ground, i.e. battery/supply positive terminal is connected to the vehicle chassis, then there is a risk that the exposed metal cage of any USB cable could come in contact with the positive connected chassis, causing uncontrolled heating of the USB cable and USB charger and potentially creating a hazard. In positive ground applications, we recommend installing an Alfatronix isolated converter between the positive ground supply and the input of the USB charger.

CHOOSE YOUR USB Pro PRODUCT

TECHNICAL DATA

Our offices

Alfatronix Limited UK

Manufacturing 

Sales Enquiries 

Tel: +44 (01202) 715517

Email: sales@alfatronix.com

Web: www.alfatronix.com

Address:

29 Newtown Business Park

Poole, Dorset, England, BH12 3LL

bottom of page