AUTOMOTIVE APPLICATIONS

AL1-H WIRELESS CHARGER UNIT

AL1-H

Designed for integration into equipment such as seatbacks or tables, permitting wireless charging to be extended to public transport. The module is typically housed in apparatus that enables mobile phones to be retained in position during charging.

AL1-H wireless charger
AL2-WS Wireless charger

AL2-WS WIRELESS PODSOLE UNIT

AL2-WS

For mounting to the back of seats or sidewalls, this elegant design allows passengers to charge both wireless and USB charging devices on the move. The two retaining clips and non-slip buttons secure the device into place permitting the wireless charging of all wireless-enabled smart devices, while the USB connector can charge another device like a phone/tablet simultaneously. Convenient wide input range of 9-32Vdc.

USB 'A' & 'C' CHARGERS 

PVPro, PVPWp, PV65R

The New PVPRO USB A & C and C only chargers have been designed to accept wide inputs of 9-32vdc from the vehicle’s / vessels electrical system to convert to 5Vdc to charge smart phones, Ipads and tablets, negating the need for an additional converter.

 

Both new products are available in an IP65 (except connector) format comprising of the PVPWP and PV65R series approved for automotive use with Reg 10 E marking.  The chargers can be used for a variety of applications and installed in harsher environments where dust and moisture ingress are prevalent.

PVPro-AC high res.png
PVPro-ACFF high res.png

PVPro STANDARD USB CHARGERS

PVPro-S.png
PVPro-DFF USB Charger

PVPro

The PVPro 9/32Vdc wide input range to 5Vdc USB chargers can be easily installed onto any vehicle and allow both drivers and passengers to readily access power to charge any device connected via a USB lead. All versions in the range can be connected directly to both 12Vdc and 24Vdc systems without adjustment. The advanced electronic design will also automatically detect if the device is an Apple or Android configuration and alter the charging process accordingly.

USB CHARGERS WITH IP65 PROTECTION

PVPWp

The PVPWp range of USB chargers offers all the performance benefits of the PVPro range with additional protection provided to the electronic circuit of the unit. A durable polyurethane compound encompasses the electronic components offering comprehensive protection against dust and liquid ingress to IP65.

PVPWP-S.png
PVPWP-DFF.png
PV65R-S USB Charger
PV65R-DFF USB Charger

IP65 RATED USB CHARGERS

WITH RAIL APPROVAL

PV65R

PV65R USB Chargers 12/24V-5V offer all the performance benefits of the PVPro range but with added liquid, dust ingress and vibration protection to IP65. For installation into buses, coaches, off road vehicles and railway. to reliably charge mobile phones, tablets and other devices.

PVPro & PV65R INSTALLATION ACCESSORIES

ACCESSORIES

USB charging installation accessories. These include the Underseat USB POD, the Wall Mounted USB POD and the Table Top Mounted USB POD.

USB-Pod assemby
USB-WPod assembly
PVPm-S USB bus pole charger

USB BUS POLE MOUNTED CHARGER

PVPm-S

12/24V USB bus pole charger designed for pole mounted applications where passengers can charge their mobile devices when journeys are relatively short. 

24VDC-12VDC VOLTAGE CONVERTERS

POWERVERTER

PowerVerter 24VDC - 12VDC isolated and non-isolated Voltage Converters, when your application requires a different, stable output voltage from your on board system.

PV6s Voltage Converter
PV6s-A Dual Voltage Converter

DUAL OUTPUT 24VDC-12VDC VOLTAGE CONVERTERS

POWERVERTER

Dual, 24VDC-12VDC Voltage Converters with a switched and permanent output for memory back up on applications like Bluetooth car kits, I.C.E. and Tachometers.

12VDC-24VDC 'UP' VOLTAGE CONVERTERS

DD SERIES

12VDC - 24VDC "UP" Voltage Converters. For any 24V Equipment that needs to be fitted onto a 12V system like a tailgate onto a Minibus and CCTV on Helicopters. Also available as IP65.

DD12-24-072  'Up' voltage converter
DDi24-24 072 Stabilizer Voltage Converter

12VDC-12VDC, 24VDC-24VDC, 48VDC-12VDC VOLTAGE CONVERTERS

DD SERIES & DDi SERIES

12V-12V and 24V-24V Voltage isolators for voltage critical equipment and 48V-12V  voltage converters for Forklift trucks and mining vehicles.

IP65 RUGGEDISED VOLTAGE CONVERTERS

POWERVERTER & DD SERIES

IP65 rated, Ruggedised PowerVerter 24VDC - 12VDC isolated and non-isolated Voltage Converters, when your application requires a different, stable output voltage from your on board system.

PV6s-RU Ruggedised Voltage Converter
PT100 - Yellow.png

POWERTECTOR LOW VOLTAGE DISCONNECT

POWERTECTOR SERIES

The PowerTector Range comprises of solid state battery devices that will monitor the source voltage and disconnect the equipment from the battery if the voltage falls below a pre-determined level.  This can work to ensure there is always sufficient power remaining in the battery to start a vehicle engine or ensure power is available for other critical applications including communications.

ICi SERIES INTELLIGENT BATTERY CHARGERS

ICi SERIES

Four stage DC intelligent battery chargers for charging 12 and 24 Volt lead acid batteries from a DC source. 24 -12 VDC , 12 – 24 VDC , 24 - 24 VDC , 12 – 12 VDC.

ICi24-24-144.png
Our offices

Alfatronix Limited UK

Manufacturing 

Sales Enquiries 

Tel: +44 (0)1202 715517

Email: sales@alfatronix.com

Web: www.alfatronix.com

Address:

29-30 Newtown Business Park

Poole, Dorset, England, BH12 3LL

Alfatronix - France, Spain and Portugal

Demandes Commerciales

Eric Noel:

Mob: +33 (0)682 917410

Email: enoel@alfatronix.com

Web: www.alfatronix.com