12/24VDC USB CHARGERS FOR RAILWAY APPLICATIONS
POWERVERTER Pro RAILWAY
USB CHARGERS CERTIFIED TO EN 50155 (EN 50121-3-2) AND EN61373 (ROLLING STOCK)
The widespread use of smartphones and computer tablets has created an increasing need for user accessible, on the move charging systems. The PowerVerter PVPro Railway range is especially designed to meet all the requirements for rolling stock applications. These units can easily be installed into seat backs or directly into carriage walls or underseat using the mounting pod.
These units are available in both standard (secured from the rear with a nut) or front fitting, secured by three screws, covered with a discreet cover ring.
Further general information can be found on the standard PowerVerter Pro leaflet.
Installations can be carried out two ways:
For Rail installations, the PV65R can be connected directly to the electrical system (either 12V or 24V). These units have been approved to EN 50155.
However, if the system specification requires galvanic isolation, then the PVPro range units can be used in conjunction with the Alfatronix PV6i-R, PV12i-R or PV24i-R isolated railway approved converters. These units have also been tested as a system to EN 50155.
Both systems have been approved for Rail Fire EN45545-2.
PVPro-S with PV6i-R
Any product in the PVPro range can be installed with a PV6i-R, PV12i-R PV24i-R to meet EN 50121-3-2
Note: A PV6i-R can power up to 6 single or 4 double output USB chargers. A PV12i-R can power up to 12 single or 8 double output USB chargers
Note: PV6i-R, PV12i-R and PV24i-R can be used to provide power in a wide variety of railway applications
All PV65R units meet EN50121-3-2.
For galvanic isolation use PVPro and
PV65R Series with PV6i-R, PV12i-R or PV24i-R
CHOOSE YOUR USB Pro RAILWAY PRODUCT
Alfatronix Limited UK
Tel: +44 (01202) 715517
29 Newtown Business Park
Poole, Dorset, England, BH12 3LL