MAINS POWER SUPPLIES IN 12V, 24V & 48V CONFIGURATIONS
The AD Series units may be used to supply mobile radios and other appliances from AC mains used in offices, portable site cabins, communication cabins, telephone exchanges, remote antennae sites, ships, oil rigs etc. The units will accept either European 230Vac or US 115Vac inputs and are available as standard in 12V, 24V and 48V output configurations. Input is via a standard IEC-320 C13/14 power cord with UK, European or US mains plugs - please state your requirement.
There’s nothing worse than a power supply lying around on the floor. The T-shaped mounting clip, common to many Alfatronix products, allows the power supplies to be installed quickly and simply in many out of the way locations, such as underneath desks or on walls. The 3 point ‘T’ clip can be fitted securely, even on uneven surfaces, quickly and simply, and then the power supply simply ‘clips’ in place.
BATTERY CHARGING REQUIRED?
A fixed voltage battery charging facility is also available with the supplementary loom; P/N AD BB loom.
FULL CIRCUIT PROTECTION
The AD Series supplies have transient, overload and overheat protection for reliable operation even in the toughest environments.
RUGGED AND COMPACT
These units, often referred to as ‘brick in the lead’ supplies are housed in a rugged, corrosion resistant anodised
aluminium extrusion. The low mass surface mount technology components offer excellent resistance to shock and vibration, thus further increasing the reliability of these products.
A green LED indicates when there is output from the converter. This gives reassurance to the installation engineer and speeds fault finding.
DESKTOP VERSIONS ALSO AVAILABLE
While the brick power supplies offer a versatile solution, if you are powering a mobile radio, try our Desktop Versions. These are configured to attach to the radio forming one dedicated unit and are available for a variety of radios including Motorola, Hytera, Tait, Kenwood, Icom, Maxon and Vertex.
The product code is developed as follows taking the AD 115/230-12 108 as an example:
|AD||AC input and DC output|
|115/230||Denotes auto select US or European AC input voltage|
|-12||Nominal 12V output|
|108||108W Capacity Unit|
|Output Voltage||Dimensions (mm)||Weight (g)|
|AD 115/230- 12 036 (3A)||AD 115/230- 24 036 (1.5A)||AD 115/230- 48 036 (0.75A)||165 x 87 x 59||675|
|AD 115/230- 12 072 (6A)||AD 115/230- 24 072 (3A)||AD 115/230- 48 072 (1.5A)||165 x 87 x 59||675|
|AD 115/230- 12 108 (9A)||AD 115/230- 24 108 (4.5A)||AD 115/230- 48 108 (2.25A)||165 x 87 x 59||675|
|AD 115/230- 12 168 (14A)||AD 115/230- 24 168 (7A)||AD 115/230- 48 168 (3.5A)||215 x 87 x 59||900|
|AD 115/230- 12 240 (20A)||AD 115/230- 24 240 (10A)||AD 115/230- 48 240 (5A)||255 x 87 x 59||1150|
|Additional Loom for battery charging - P/N: AD BB Loom|
|Input voltage range||Auto-Select, 85-135Vac and 170-265Vac, 50/60Hz|
|Output voltage options||13.6Vdc, 27.2Vdc or 54.4Vdc, as ordered . Worst case limits are +/- 4%|
|<50mV pk-pk at continuous load|
|Power Conversion Efficiency||Typically 85%|
|Isolation between input and case/output Isolation casework to ground||1.5kVac/3.0kVac rms
Connected directly to mains input ground
|Normal operating temperature||-25ºC to +30ºC to meet this specification table
+30ºC to +70ºC de-rate linearly to 0A
|Storage Temperature||-25ºC to +100ºC|
|Max case temperature||70ºC at full load with 25ºC ambient|
|Operating humidity||95% max, non-condensing|
|Casework||Anodized aluminium, glass-filled polycarbonate|
|IEC-320 C14 socket, C13 terminated cordset
6.3mm push-on blade terminals
6.3mm push-on blade terminals, adjacent to input (additional external ground if required)
|Output Indicator||Green LED adjacent to output terminals|
|Mounting Method||‘Click ‘n’ Fit’ mounting clip or rubber feet. DIN rails clips available required|
|Safe area protection: Over Current
Output over voltage
|Limited by current sensing circuit
Limited by temperature sensing circuit
Protected by independent shut down circuit
Protected by filters and rugged component selection
Protected by input and output fuses
|Approvals||2014/30/EU The general EMC directive
2014/35/EU The low voltage directive
93/68/EEC The CE marking directive
|Tested to||EN60950, EN55022, EN61204-3|